Unconfigured Ad Widget

Collapse

Anúncio

Collapse
No announcement yet.

Introduction to Assembly

Collapse
X
 
  • Filter
  • Tempo
  • Show
Clear All
new posts

  • Font Size
    #1

    Introduction to Assembly

    What is Assembly Language?
    Each personal computer has a microprocessor that manages the computer's arithmetical, logical, and control activities.

    Each family of processors has its own set of instructions for handling various operations such as getting input from keyboard, displaying information on screen and performing various other jobs. These set of instructions are called 'machine language instructions'.

    A processor understands only machine language instructions, which are strings of 1's and 0's. However, machine language is too obscure and complex for using in software development. So, the low-level assembly language is designed for a specific family of processors that represents various instructions in symbolic code and a more understandable form.

    Advantages of Assembly Language
    Having an understanding of assembly language makes one aware of −

    How programs interface with OS, processor, and BIOS;
    How data is represented in memory and other external devices;
    How the processor accesses and executes instruction;
    How instructions access and process data;
    How a program accesses external devices.
    Other advantages of using assembly language are −

    It requires less memory and execution time;

    It allows hardware-specific complex jobs in an easier way;

    It is suitable for time-critical jobs;

    It is most suitable for writing interrupt service routines and other memory resident programs.

    Basic Features of PC Hardware
    The main internal hardware of a PC consists of processor, memory, and registers. Registers are processor components that hold data and address. To execute a program, the system copies it from the external device into the internal memory. The processor executes the program instructions.

    The fundamental unit of computer storage is a bit; it could be ON (1) or OFF (0). A group of nine related bits makes a byte, out of which eight bits are used for data and the last one is used for parity. According to the rule of parity, the number of bits that are ON (1) in each byte should always be odd.

    So, the parity bit is used to make the number of bits in a byte odd. If the parity is even, the system assumes that there had been a parity error (though rare), which might have been caused due to hardware fault or electrical disturbance.

    The processor supports the following data sizes −

    Word: a 2-byte data item
    Doubleword: a 4-byte (32 bit) data item
    Quadword: an 8-byte (64 bit) data item
    Paragraph: a 16-byte (128 bit) area
    Kilobyte: 1024 bytes
    Megabyte: 1,048,576 bytes
    Binary Number System
    Every number system uses positional notation, i.e., each position in which a digit is written has a different positional value. Each position is power of the base, which is 2 for binary number system, and these powers begin at 0 and increase by 1.

    The following table shows the positional values for an 8-bit binary number, where all bits are set ON.

    The value of a binary number is based on the presence of 1 bits and their positional value. So, the value of a given binary number is −

    1 + 2 + 4 + 8 +16 + 32 + 64 + 128 = 255

    which is same as 28 - 1.

    Hexadecimal Number System
    Hexadecimal number system uses base 16. The digits in this system range from 0 to 15. By convention, the letters A through F is used to represent the hexadecimal digits corresponding to decimal values 10 through 15.

    Hexadecimal numbers in computing is used for abbreviating lengthy binary representations. Basically, hexadecimal number system represents a binary data by dividing each byte in half and expressing the value of each half-byte. The following table provides the decimal, binary, and hexadecimal equivalents −

    To convert a binary number to its hexadecimal equivalent, break it into groups of 4 consecutive groups each, starting from the right, and write those groups over the corresponding digits of the hexadecimal number.

    Example − Binary number 1000 1100 1101 0001 is equivalent to hexadecimal - 8CD1

    To convert a hexadecimal number to binary, just write each hexadecimal digit into its 4-digit binary equivalent.

    Example − Hexadecimal number FAD8 is equivalent to binary - 1111 1010 1101 1000

    Binary Arithmetic
    The following table illustrates four simple rules for binary addition −


    Rules (iii) and (iv) show a carry of a 1-bit into the next left position.

    Example

    A negative binary value is expressed in two's complement notation. According to this rule, to convert a binary number to its negative value is to reverse its bit values and add 1.

    Example

    To subtract one value from another, convert the number being subtracted to two's complement format and add the numbers.

    Example

    Subtract 42 from 53

    Overflow of the last 1 bit is lost.

    Addressing Data in Memory
    The process through which the processor controls the execution of instructions is referred as the fetch-decode-execute cycle or the execution cycle. It consists of three continuous steps −

    Fetching the instruction from memory
    Decoding or identifying the instruction
    Executing the instruction
    The processor may access one or more bytes of memory at a time. Let us consider a hexadecimal number 0725H. This number will require two bytes of memory. The high-order byte or most significant byte is 07 and the low-order byte is 25.

    The processor stores data in reverse-byte sequence, i.e., a low-order byte is stored in a low memory address and a high-order byte in high memory address. So, if the processor brings the value 0725H from register to memory, it will transfer 25 first to the lower memory address and 07 to the next memory address.


    x: memory address

    When the processor gets the numeric data from memory to register, it again reverses the bytes. There are two kinds of memory addresses −

    Absolute address - a direct reference of specific location.

    Segment address (or offset) - starting address of a memory segment with the offset value.
    Last edited by CryptoSystem; 21-01-2018, 21:40.
    WhiteCollarGroup till I die
    MI5, MI6,NSA,FBI,Army, CIA,Navy,Air Force, Mossad, PF and all this shit can't stop me.
    Similar Threads

  • Font Size
    #2
    Parabens

    Boa postagem, quase não é tratado mais o Assembly
    O bem e o mal não existem, existe os pontos de vista

    Comment

    X
    Working...
    X